In the middle of the summer you could probably be convinced that just about the best invention anyone has ever come up with is an air conditioner. However, after youve bought the unit and lugged it home you still need to install it before you can enjoy that beautiful cool air. Good news, its straightforward and simple.

Things You’ll Need:
Caulking gun and waterproof caulk
Measuring tape and pencil
Air conditioner, mounting hardware, foam insulation (usually provided by manufacturer)
Screwdriver and screws

Step1 Measure the area you want to cool and calculate the size of the air conditioner you will need. (See below)

Step2 Determine the window you want to install the air conditioner in and measure its opening. The air conditioner you buy needs to fit into the opening and all air conditioners arent the same size.

Step3 Install the mounting brackets that came with the air conditioner unit (be sure to follow the manufacturers directions).

Step4 Slide the air conditioner into the window opening and fix it to the mounting brackets (again as per manufacturers instructions).

Step5 Lower the window down onto the top of the unit.

Step6 Pull out the extensions on each side of the air conditioner and attach them to the window frame.

Step7 Using a piece of foam (may be provided by the manufacturer), seal between the top of the air conditioner unit and the window.

Step8 Attach the drainage hose (if supplied) to the outside of the air conditioner.

Step9 Caulk around the outside of the unit to help keep the warm air outside.

Step10 Plug in your air conditioner, turn it on and enjoy that cool air.

Contributed By Murray Anderson